top-ucf-for-minicpu-os-i2c-jc のバックアップ(No.1)

バックアップ一覧
差分を表示
現在との差分を表示
ソースを表示
top-ucf-for-minicpu-os-i2c-jc へ行く。
- 1 (2017-08-28 (月) 23:42:34)
top.ucf (nexys4の基板上の温度計を使う場合で ISEを使う場合)
## This file is a general .ucf for the Nexys4 rev B board
## To use it in a project:
## - uncomment the lines corresponding to used pins
## - rename the used signals according to the project

## Clock signal
NET "bclck"   LOC = "E3"	| IOSTANDARD = "LVCMOS33";					#Bank = 35, Pin name = IO_L12P_T1_MRCC_35,					Sch name = CLK100MHZ
#NET "clk" TNM_NET = sys_clk_pin;
#TIMESPEC TS_sys_clk_pin = PERIOD sys_clk_pin 100 MHz HIGH 50%; 
 
## Switches
NET "sw<0>"			LOC = "U9"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L21P_T3_DQS_34,					Sch name = SW0
NET "sw<1>"			LOC = "U8"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_25_34,							Sch name = SW1
NET "sw<2>"			LOC = "R7"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L23P_T3_34,						Sch name = SW2
NET "sw<3>"			LOC = "R6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L19P_T3_34,						Sch name = SW3
NET "sw<4>"			LOC = "R5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L19N_T3_VREF_34,					Sch name = SW4
NET "sw<5>"			LOC = "V7"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L20P_T3_34,						Sch name = SW5
NET "sw<6>"			LOC = "V6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L20N_T3_34,						Sch name = SW6
NET "sw<7>"			LOC = "V5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L10P_T1_34,						Sch name = SW7
NET "sw<8>"			LOC = "U4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L8P_T1-34,						Sch name = SW8
NET "sw<9>"			LOC = "V2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L9N_T1_DQS_34,					Sch name = SW9
NET "sw<10>"			LOC = "U2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L9P_T1_DQS_34,					Sch name = SW10
NET "sw<11>"			LOC = "T3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L11N_T1_MRCC_34,					Sch name = SW11
NET "sw<12>"			LOC = "T1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L17N_T2_34,						Sch name = SW12
NET "sw<13>"			LOC = "R3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L11P_T1_SRCC_34,					Sch name = SW13
NET "sw<14>"			LOC = "P3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L14N_T2_SRCC_34,					Sch name = SW14
NET "sw<15>"			LOC = "P4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L14P_T2_SRCC_34,					Sch name = SW15
 
## LEDs
NET "ledOut<0>"			LOC = "T8"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L24N_T3_34,						Sch name = LED0
NET "ledOut<1>"			LOC = "V9"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L21N_T3_DQS_34,					Sch name = LED1
NET "ledOut<2>"			LOC = "R8"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L24P_T3_34,						Sch name = LED2
NET "ledOut<3>"			LOC = "T6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L23N_T3_34,						Sch name = LED3
NET "ledOut<4>"			LOC = "T5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L12P_T1_MRCC_34,					Sch name = LED4
NET "ledOut<5>"			LOC = "T4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L12N_T1_MRCC_34,					Sch	name = LED5
NET "ledOut<6>"			LOC = "U7"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L22P_T3_34,						Sch name = LED6
NET "ledOut<7>"			LOC = "U6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L22N_T3_34,						Sch name = LED7
NET "ledOut<8>"			LOC = "V4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L10N_T1_34,						Sch name = LED8
NET "ledOut<9>"			LOC = "U3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L8N_T1_34,						Sch name = LED9
NET "ledOut<10>"			LOC = "V1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L7N_T1_34,						Sch name = LED10
NET "ledOut<11>"			LOC = "R1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L17P_T2_34,						Sch name = LED11
NET "ledOut<12>"			LOC = "P5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L13N_T2_MRCC_34,					Sch name = LED12
NET "ledOut<13>"			LOC = "U1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L7P_T1_34,						Sch name = LED13
NET "ledOut<14>"			LOC = "R2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L15N_T2_DQS_34,					Sch name = LED14
NET "ledOut<15>"			LOC = "P2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L15P_T2_DQS_34,					Sch name = LED15

NET "colorLed_1<2>"			LOC = "K5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L5P_T0_34,						Sch name = LED16_R
NET "colorLed_1<1>"		LOC = "F13"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L5P_T0_AD9P_15,					Sch name = LED16_G
NET "colorLed_1<0>"		LOC = "F6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L19N_T3_VREF_35,					Sch name = LED16_B
NET "colorLed_2<2>"			LOC = "K6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_0_34,								Sch name = LED17_R
NET "colorLed_2<1>"		LOC = "H6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_24P_T3_35,						Sch name =  LED17_G
NET "colorLed_2<0>"		LOC = "L16"	| IOSTANDARD = "LVCMOS33";	#Bank = CONFIG, Pin name = IO_L3N_T0_DQS_EMCCLK_14,			Sch name = LED17_B

## 7 segment display
NET "sSegCathode<7>"			LOC = "L3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L2N_T0_34,						Sch name = CA
NET "sSegCathode<6>"			LOC = "N1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L3N_T0_DQS_34,					Sch name = CB
NET "sSegCathode<5>"			LOC = "L5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L6N_T0_VREF_34,					Sch name = CC
NET "sSegCathode<4>"			LOC = "L4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L5N_T0_34,						Sch name = CD
NET "sSegCathode<3>"			LOC = "K3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L2P_T0_34,						Sch name = CE
NET "sSegCathode<2>"			LOC = "M2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L4N_T0_34,						Sch name = CF
NET "sSegCathode<1>"			LOC = "L6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L6P_T0_34,						Sch name = CG

NET "sSegCathode<0>"				LOC = "M4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L16P_T2_34,						Sch name = DP

NET "sSegAnode<0>"			LOC = "N6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L18N_T2_34,						Sch name = AN0
NET "sSegAnode<1>"			LOC = "M6"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L18P_T2_34,						Sch name = AN1
NET "sSegAnode<2>"			LOC = "M3"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L4P_T0_34,						Sch name = AN2
NET "sSegAnode<3>"			LOC = "N5"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L13_T2_MRCC_34,					Sch name = AN3
NET "sSegAnode<4>"			LOC = "N2"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L3P_T0_DQS_34,					Sch name = AN4
NET "sSegAnode<5>"			LOC = "N4"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L16N_T2_34,						Sch name = AN5
NET "sSegAnode<6>"			LOC = "L1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L1P_T0_34,						Sch name = AN6
NET "sSegAnode<7>"			LOC = "M1"	| IOSTANDARD = "LVCMOS33";		#Bank = 34, Pin name = IO_L1N_T034,							Sch name = AN7

## Buttons
#NET "btnCpuReset"		LOC = "C12"	| IOSTANDARD = "LVCMOS33";		#Bank = 15,  Pin name = IO_L3P_T0_DQS_AD1P_15,				Sch name = CPU_RESET
NET "bc"				LOC = "E16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L11N_T1_SRCC_15,					Sch name = BTNC
NET "bu"				LOC = "F15"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L14P_T2_SRCC_15,					Sch name = BTNU
NET "bl"				LOC = "T16"	| IOSTANDARD = "LVCMOS33";		#Bank = CONFIG, Pin name = IO_L15N_T2_DQS_DOUT_CSO_B_14,	Sch name = BTNL
NET "br"				LOC = "R10"	| IOSTANDARD = "LVCMOS33";		#Bank = 14, Pin name = IO_25_14,							Sch name = BTNR
NET "bd"				LOC = "V10"	| IOSTANDARD = "LVCMOS33";		#Bank = 14, Pin name = IO_L21P_T3_DQS_14,					Sch name = BTND
   
## Pmod Header JC
#NET "JC<0>"			LOC = "K2"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L23P_T3_35,						Sch name = JC1
#NET "JC<1>"			LOC = "E7"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L6P_T0_35,						Sch name = JC2
#NET "JC<2>"			LOC = "J3"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L22P_T3_35,						Sch name = JC3
#NET "JC<3>"			LOC = "J4"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L21P_T3_DQS_35,					Sch name = JC4
#NET "JC<4>"			LOC = "K1"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L23N_T3_35,						Sch name = JC7
#NET "JC<5>"			LOC = "E6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L5P_T0_AD13P_35,					Sch name = JC8
#NET "JC<6>"			LOC = "J2"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L22N_T3_35,						Sch name = JC9
#NET "JC<7>"			LOC = "G6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L19P_T3_35,						Sch name = JC10
 
NET "jc<0>"			LOC = "K1"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L23N_T3_35,						Sch name = JC7
NET "jc<1>"			LOC = "E6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L5P_T0_AD13P_35,					Sch name = JC8
NET "jc<2>"			LOC = "J2"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L22N_T3_35,						Sch name = JC9
NET "jc<3>"			LOC = "G6"	| IOSTANDARD = "LVCMOS33";		#Bank = 35, Pin name = IO_L19P_T3_35,						Sch name = JC10

## Temperature Sensor
#NET "tmpSCL"			LOC = "F16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L14N_T2_SRCC_15,					Sch name = TMP_SCL
#NET "tmpSDA"			LOC = "G16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L13N_T2_MRCC_15,					Sch name = TMP_SDA
#NET "tmpInt"			LOC = "D14"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L1P_T0_AD0P_15,					Sch name = TMP_INT
#NET "tmpCT"			LOC = "C14"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L1N_T0_AD0N_15,					Sch name = TMP_CT
#NET "scl"			LOC = "F16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L14N_T2_SRCC_15,					Sch name = TMP_SCL
#NET "sda"			LOC = "G16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L13N_T2_MRCC_15,					Sch name = TMP_SDA
#NET "tmpInt"			LOC = "D14"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L1P_T0_AD0P_15,					Sch name = TMP_INT
#NET "tmpCT"			LOC = "C14"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L1N_T0_AD0N_15,					Sch name = TMP_CT
 NET "scl"			LOC = "F16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L14N_T2_SRCC_15,					Sch name = TMP_SCL
NET "sda"			LOC = "G16"	| IOSTANDARD = "LVCMOS33";		#Bank = 15, Pin name = IO_L13N_T2_MRCC_15,					Sch name = TMP_SDA