top-xdc-for-minicpu-os-i2c-jc
MiniCPU簡易OS用ucf †
- top.ucf (nexys4の基板上の温度計を使う場合で ISEを使う場合)
## This file is a general .ucf for the Nexys4 rev B board
## To use it in a project:
## - uncomment the lines corresponding to used pins
## - rename the used signals according to the project
## Clock signal
NET "bclck" LOC = "E3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L12P_T1_MRCC_35, Sch name = CLK100MHZ
#NET "clk" TNM_NET = sys_clk_pin;
#TIMESPEC TS_sys_clk_pin = PERIOD sys_clk_pin 100 MHz HIGH 50%;
## Switches
NET "sw<0>" LOC = "U9" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L21P_T3_DQS_34, Sch name = SW0
NET "sw<1>" LOC = "U8" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_25_34, Sch name = SW1
NET "sw<2>" LOC = "R7" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L23P_T3_34, Sch name = SW2
NET "sw<3>" LOC = "R6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L19P_T3_34, Sch name = SW3
NET "sw<4>" LOC = "R5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L19N_T3_VREF_34, Sch name = SW4
NET "sw<5>" LOC = "V7" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L20P_T3_34, Sch name = SW5
NET "sw<6>" LOC = "V6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L20N_T3_34, Sch name = SW6
NET "sw<7>" LOC = "V5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L10P_T1_34, Sch name = SW7
NET "sw<8>" LOC = "U4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L8P_T1-34, Sch name = SW8
NET "sw<9>" LOC = "V2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L9N_T1_DQS_34, Sch name = SW9
NET "sw<10>" LOC = "U2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L9P_T1_DQS_34, Sch name = SW10
NET "sw<11>" LOC = "T3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L11N_T1_MRCC_34, Sch name = SW11
NET "sw<12>" LOC = "T1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L17N_T2_34, Sch name = SW12
NET "sw<13>" LOC = "R3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L11P_T1_SRCC_34, Sch name = SW13
NET "sw<14>" LOC = "P3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L14N_T2_SRCC_34, Sch name = SW14
NET "sw<15>" LOC = "P4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L14P_T2_SRCC_34, Sch name = SW15
## LEDs
NET "ledOut<0>" LOC = "T8" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L24N_T3_34, Sch name = LED0
NET "ledOut<1>" LOC = "V9" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L21N_T3_DQS_34, Sch name = LED1
NET "ledOut<2>" LOC = "R8" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L24P_T3_34, Sch name = LED2
NET "ledOut<3>" LOC = "T6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L23N_T3_34, Sch name = LED3
NET "ledOut<4>" LOC = "T5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L12P_T1_MRCC_34, Sch name = LED4
NET "ledOut<5>" LOC = "T4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L12N_T1_MRCC_34, Sch name = LED5
NET "ledOut<6>" LOC = "U7" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L22P_T3_34, Sch name = LED6
NET "ledOut<7>" LOC = "U6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L22N_T3_34, Sch name = LED7
NET "ledOut<8>" LOC = "V4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L10N_T1_34, Sch name = LED8
NET "ledOut<9>" LOC = "U3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L8N_T1_34, Sch name = LED9
NET "ledOut<10>" LOC = "V1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L7N_T1_34, Sch name = LED10
NET "ledOut<11>" LOC = "R1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L17P_T2_34, Sch name = LED11
NET "ledOut<12>" LOC = "P5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L13N_T2_MRCC_34, Sch name = LED12
NET "ledOut<13>" LOC = "U1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L7P_T1_34, Sch name = LED13
NET "ledOut<14>" LOC = "R2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L15N_T2_DQS_34, Sch name = LED14
NET "ledOut<15>" LOC = "P2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L15P_T2_DQS_34, Sch name = LED15
NET "colorLed_1<2>" LOC = "K5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L5P_T0_34, Sch name = LED16_R
NET "colorLed_1<1>" LOC = "F13" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L5P_T0_AD9P_15, Sch name = LED16_G
NET "colorLed_1<0>" LOC = "F6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L19N_T3_VREF_35, Sch name = LED16_B
NET "colorLed_2<2>" LOC = "K6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_0_34, Sch name = LED17_R
NET "colorLed_2<1>" LOC = "H6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_24P_T3_35, Sch name = LED17_G
NET "colorLed_2<0>" LOC = "L16" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L3N_T0_DQS_EMCCLK_14, Sch name = LED17_B
## 7 segment display
NET "sSegCathode<7>" LOC = "L3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L2N_T0_34, Sch name = CA
NET "sSegCathode<6>" LOC = "N1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L3N_T0_DQS_34, Sch name = CB
NET "sSegCathode<5>" LOC = "L5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L6N_T0_VREF_34, Sch name = CC
NET "sSegCathode<4>" LOC = "L4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L5N_T0_34, Sch name = CD
NET "sSegCathode<3>" LOC = "K3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L2P_T0_34, Sch name = CE
NET "sSegCathode<2>" LOC = "M2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L4N_T0_34, Sch name = CF
NET "sSegCathode<1>" LOC = "L6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L6P_T0_34, Sch name = CG
NET "sSegCathode<0>" LOC = "M4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L16P_T2_34, Sch name = DP
NET "sSegAnode<0>" LOC = "N6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L18N_T2_34, Sch name = AN0
NET "sSegAnode<1>" LOC = "M6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L18P_T2_34, Sch name = AN1
NET "sSegAnode<2>" LOC = "M3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L4P_T0_34, Sch name = AN2
NET "sSegAnode<3>" LOC = "N5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L13_T2_MRCC_34, Sch name = AN3
NET "sSegAnode<4>" LOC = "N2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L3P_T0_DQS_34, Sch name = AN4
NET "sSegAnode<5>" LOC = "N4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L16N_T2_34, Sch name = AN5
NET "sSegAnode<6>" LOC = "L1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L1P_T0_34, Sch name = AN6
NET "sSegAnode<7>" LOC = "M1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L1N_T034, Sch name = AN7
## Buttons
#NET "btnCpuReset" LOC = "C12" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L3P_T0_DQS_AD1P_15, Sch name = CPU_RESET
NET "bc" LOC = "E16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L11N_T1_SRCC_15, Sch name = BTNC
NET "bu" LOC = "F15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14P_T2_SRCC_15, Sch name = BTNU
NET "bl" LOC = "T16" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L15N_T2_DQS_DOUT_CSO_B_14, Sch name = BTNL
NET "br" LOC = "R10" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_25_14, Sch name = BTNR
NET "bd" LOC = "V10" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L21P_T3_DQS_14, Sch name = BTND
## Pmod Header JC
#NET "JC<0>" LOC = "K2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L23P_T3_35, Sch name = JC1
#NET "JC<1>" LOC = "E7" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L6P_T0_35, Sch name = JC2
#NET "JC<2>" LOC = "J3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L22P_T3_35, Sch name = JC3
#NET "JC<3>" LOC = "J4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L21P_T3_DQS_35, Sch name = JC4
#NET "JC<4>" LOC = "K1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L23N_T3_35, Sch name = JC7
#NET "JC<5>" LOC = "E6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L5P_T0_AD13P_35, Sch name = JC8
#NET "JC<6>" LOC = "J2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L22N_T3_35, Sch name = JC9
#NET "JC<7>" LOC = "G6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L19P_T3_35, Sch name = JC10
NET "jc<0>" LOC = "K1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L23N_T3_35, Sch name = JC7
NET "jc<1>" LOC = "E6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L5P_T0_AD13P_35, Sch name = JC8
NET "jc<2>" LOC = "J2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L22N_T3_35, Sch name = JC9
NET "jc<3>" LOC = "G6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L19P_T3_35, Sch name = JC10
## Temperature Sensor
#NET "tmpSCL" LOC = "F16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14N_T2_SRCC_15, Sch name = TMP_SCL
#NET "tmpSDA" LOC = "G16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L13N_T2_MRCC_15, Sch name = TMP_SDA
#NET "tmpInt" LOC = "D14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1P_T0_AD0P_15, Sch name = TMP_INT
#NET "tmpCT" LOC = "C14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1N_T0_AD0N_15, Sch name = TMP_CT
#NET "scl" LOC = "F16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14N_T2_SRCC_15, Sch name = TMP_SCL
#NET "sda" LOC = "G16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L13N_T2_MRCC_15, Sch name = TMP_SDA
#NET "tmpInt" LOC = "D14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1P_T0_AD0P_15, Sch name = TMP_INT
#NET "tmpCT" LOC = "C14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1N_T0_AD0N_15, Sch name = TMP_CT
NET "scl" LOC = "F16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14N_T2_SRCC_15, Sch name = TMP_SCL
NET "sda" LOC = "G16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L13N_T2_MRCC_15, Sch name = TMP_SDA
Counter: 558,
today: 1,
yesterday: 0
|
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
