i2c-mpl3115a2-ex1
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
]
開始行:
[[FrontPage]]
objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=120
command: program sensors
program: 'ex("service","clear sendBuffer")
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: '
program: ' init barometer , MPL3115A2
program: ex("pi4j", "i2c write1 0x60,0x26,0x39") 'set to altmeter with an OSR=128
program: ex("pi4j", "i2c write1 0x60,0x13,0x07") 'enable data flags in PT_DATA_CFG
program: delay(10)
program: '
program: ' read pressure
program: p1s=ex("pi4j", "i2c read1 0x60,0x01")
program: p2s=ex("pi4j", "i2c read1 0x60,0x02")
program: p3s=ex("pi4j", "i2c read1 0x60,0x03")
program: p1=s2i(p1s)
program: p2=s2i(p2s)
program: p3=s2i(p3s)
program: px=(p1*256+p2)*256+p3
program: px=px/16
program: px=px/4.0
program: px=px/100.0
program: ex("service","putSendBuffer device=pressure, Date="+ex("service","getCurrentDate.")+", v="+px)
program: '
program: ex("pi4j", "i2c close.")
program: ex("service","sendResults.")
command: end sensors
command: run sensors
result:
device=pressure, Date=2019/3/21/ 19:39:45, v=0.0
device=pressure, Date=2019/3/21/ 19:40:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:40:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:41:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:41:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:42:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:42:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:43:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:43:44, v=2446.675
currentDevice="yamaRasPiDp1_1",Date=2019/3/21/ 19:43:44
終了行:
[[FrontPage]]
objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=120
command: program sensors
program: 'ex("service","clear sendBuffer")
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: '
program: ' init barometer , MPL3115A2
program: ex("pi4j", "i2c write1 0x60,0x26,0x39") 'set to altmeter with an OSR=128
program: ex("pi4j", "i2c write1 0x60,0x13,0x07") 'enable data flags in PT_DATA_CFG
program: delay(10)
program: '
program: ' read pressure
program: p1s=ex("pi4j", "i2c read1 0x60,0x01")
program: p2s=ex("pi4j", "i2c read1 0x60,0x02")
program: p3s=ex("pi4j", "i2c read1 0x60,0x03")
program: p1=s2i(p1s)
program: p2=s2i(p2s)
program: p3=s2i(p3s)
program: px=(p1*256+p2)*256+p3
program: px=px/16
program: px=px/4.0
program: px=px/100.0
program: ex("service","putSendBuffer device=pressure, Date="+ex("service","getCurrentDate.")+", v="+px)
program: '
program: ex("pi4j", "i2c close.")
program: ex("service","sendResults.")
command: end sensors
command: run sensors
result:
device=pressure, Date=2019/3/21/ 19:39:45, v=0.0
device=pressure, Date=2019/3/21/ 19:40:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:40:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:41:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:41:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:42:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:42:44, v=2446.675
device=pressure, Date=2019/3/21/ 19:43:14, v=2446.675
device=pressure, Date=2019/3/21/ 19:43:44, v=2446.675
currentDevice="yamaRasPiDp1_1",Date=2019/3/21/ 19:43:44
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
