i2c-ADS1115-ex1
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
]
開始行:
[[FrontPage]]
objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-ADS1115-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-ADS1115-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=240
command: program Sensors
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: 'get the Aanalog value from the ADS1115 ch1
program: config=0x0003|0x0000|0x0000|0x0000|0x0080|0x0100
program: config=config|0x0000
program: config= config|0x4000 'channel 0
program: config=config|0x8000
program: ex("pi4j", "i2c write2 0x49,0x01,"+config)
program: delay(10)
program: v2=ex("pi4j","i2c read2 0x49,0x00")
program: co2=s2i(v2)
program: co2=co2+800
program: '
program: config=0x0003|0x0000|0x0000|0x0000|0x0080|0x0100
program: config=config|0x0000
program: config= config|0x5000 'channel 1
program: config=config|0x8000
program: ex("pi4j", "i2c write2 0x49,0x01,"+config)
program: delay(10)
program: v2=ex("pi4j","i2c read2 0x49,0x00")
program: ain=s2i(v2)
program: ain=ain+800
program: '
program: date=ex("service","getCurrentDate.")
program: ex("service","putSendBuffer device=airPol, Date="+date+", v="+co2)
program: ex("service","putSendBuffer device=ain, Date="+date+", v="+ain)
program: ex("service","sendResults.")
command: end Sensors
command: run Sensors
result:
device=airPol, Date=2019/6/7/ 1:12:21, v=799
device=ain, Date=2019/6/7/ 1:12:21, v=799
device=airPol, Date=2019/6/7/ 1:12:50, v=799
device=ain, Date=2019/6/7/ 1:12:50, v=799
device=airPol, Date=2019/6/7/ 1:13:20, v=799
device=ain, Date=2019/6/7/ 1:13:20, v=799
device=airPol, Date=2019/6/7/ 1:13:50, v=799
device=ain, Date=2019/6/7/ 1:13:50, v=799
device=airPol, Date=2019/6/7/ 1:14:20, v=799
device=ain, Date=2019/6/7/ 1:14:20, v=799
device=airPol, Date=2019/6/7/ 1:14:50, v=799
device=ain, Date=2019/6/7/ 1:14:50, v=799
device=airPol, Date=2019/6/7/ 1:15:20, v=799
device=ain, Date=2019/6/7/ 1:15:20, v=799
device=airPol, Date=2019/6/7/ 1:15:50, v=799
device=ain, Date=2019/6/7/ 1:15:50, v=799
device=airPol, Date=2019/6/7/ 1:16:20, v=799
device=ain, Date=2019/6/7/ 1:16:20, v=799
device=airPol, Date=2019/6/7/ 1:16:51, v=799
device=ain, Date=2019/6/7/ 1:16:51, v=799
device=airPol, Date=2019/6/7/ 1:17:20, v=799
device=ain, Date=2019/6/7/ 1:17:20, v=799
device=airPol, Date=2019/6/7/ 1:17:51, v=799
device=ain, Date=2019/6/7/ 1:17:51, v=799
device=airPol, Date=2019/6/7/ 1:18:21, v=799
device=ain, Date=2019/6/7/ 1:18:21, v=799
device=airPol, Date=2019/6/7/ 1:18:51, v=799
device=ain, Date=2019/6/7/ 1:18:51, v=799
device=airPol, Date=2019/6/7/ 1:19:21, v=799
device=ain, Date=2019/6/7/ 1:19:21, v=799
device=airPol, Date=2019/6/7/ 1:19:51, v=799
device=ain, Date=2019/6/7/ 1:19:51, v=799
device=airPol, Date=2019/6/7/ 1:20:21, v=799
device=ain, Date=2019/6/7/ 1:20:21, v=799
device=airPol, Date=2019/6/7/ 1:20:51, v=799
device=ain, Date=2019/6/7/ 1:20:51, v=799
device=airPol, Date=2019/6/7/ 1:21:21, v=799
device=ain, Date=2019/6/7/ 1:21:21, v=799
device=airPol, Date=2019/6/7/ 1:21:51, v=799
device=ain, Date=2019/6/7/ 1:21:51, v=799
device=airPol, Date=2019/6/7/ 1:22:21, v=799
device=ain, Date=2019/6/7/ 1:22:21, v=799
currentDevice="yamaRasPiDp1_1",Date=2019/6/7/ 1:22:21
終了行:
[[FrontPage]]
objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-ADS1115-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-ADS1115-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=240
command: program Sensors
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: 'get the Aanalog value from the ADS1115 ch1
program: config=0x0003|0x0000|0x0000|0x0000|0x0080|0x0100
program: config=config|0x0000
program: config= config|0x4000 'channel 0
program: config=config|0x8000
program: ex("pi4j", "i2c write2 0x49,0x01,"+config)
program: delay(10)
program: v2=ex("pi4j","i2c read2 0x49,0x00")
program: co2=s2i(v2)
program: co2=co2+800
program: '
program: config=0x0003|0x0000|0x0000|0x0000|0x0080|0x0100
program: config=config|0x0000
program: config= config|0x5000 'channel 1
program: config=config|0x8000
program: ex("pi4j", "i2c write2 0x49,0x01,"+config)
program: delay(10)
program: v2=ex("pi4j","i2c read2 0x49,0x00")
program: ain=s2i(v2)
program: ain=ain+800
program: '
program: date=ex("service","getCurrentDate.")
program: ex("service","putSendBuffer device=airPol, Date="+date+", v="+co2)
program: ex("service","putSendBuffer device=ain, Date="+date+", v="+ain)
program: ex("service","sendResults.")
command: end Sensors
command: run Sensors
result:
device=airPol, Date=2019/6/7/ 1:12:21, v=799
device=ain, Date=2019/6/7/ 1:12:21, v=799
device=airPol, Date=2019/6/7/ 1:12:50, v=799
device=ain, Date=2019/6/7/ 1:12:50, v=799
device=airPol, Date=2019/6/7/ 1:13:20, v=799
device=ain, Date=2019/6/7/ 1:13:20, v=799
device=airPol, Date=2019/6/7/ 1:13:50, v=799
device=ain, Date=2019/6/7/ 1:13:50, v=799
device=airPol, Date=2019/6/7/ 1:14:20, v=799
device=ain, Date=2019/6/7/ 1:14:20, v=799
device=airPol, Date=2019/6/7/ 1:14:50, v=799
device=ain, Date=2019/6/7/ 1:14:50, v=799
device=airPol, Date=2019/6/7/ 1:15:20, v=799
device=ain, Date=2019/6/7/ 1:15:20, v=799
device=airPol, Date=2019/6/7/ 1:15:50, v=799
device=ain, Date=2019/6/7/ 1:15:50, v=799
device=airPol, Date=2019/6/7/ 1:16:20, v=799
device=ain, Date=2019/6/7/ 1:16:20, v=799
device=airPol, Date=2019/6/7/ 1:16:51, v=799
device=ain, Date=2019/6/7/ 1:16:51, v=799
device=airPol, Date=2019/6/7/ 1:17:20, v=799
device=ain, Date=2019/6/7/ 1:17:20, v=799
device=airPol, Date=2019/6/7/ 1:17:51, v=799
device=ain, Date=2019/6/7/ 1:17:51, v=799
device=airPol, Date=2019/6/7/ 1:18:21, v=799
device=ain, Date=2019/6/7/ 1:18:21, v=799
device=airPol, Date=2019/6/7/ 1:18:51, v=799
device=ain, Date=2019/6/7/ 1:18:51, v=799
device=airPol, Date=2019/6/7/ 1:19:21, v=799
device=ain, Date=2019/6/7/ 1:19:21, v=799
device=airPol, Date=2019/6/7/ 1:19:51, v=799
device=ain, Date=2019/6/7/ 1:19:51, v=799
device=airPol, Date=2019/6/7/ 1:20:21, v=799
device=ain, Date=2019/6/7/ 1:20:21, v=799
device=airPol, Date=2019/6/7/ 1:20:51, v=799
device=ain, Date=2019/6/7/ 1:20:51, v=799
device=airPol, Date=2019/6/7/ 1:21:21, v=799
device=ain, Date=2019/6/7/ 1:21:21, v=799
device=airPol, Date=2019/6/7/ 1:21:51, v=799
device=ain, Date=2019/6/7/ 1:21:51, v=799
device=airPol, Date=2019/6/7/ 1:22:21, v=799
device=ain, Date=2019/6/7/ 1:22:21, v=799
currentDevice="yamaRasPiDp1_1",Date=2019/6/7/ 1:22:21
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
