sensors-1-class-2 の変更点

追加された行はこの色です。
削除された行はこの色です。
sensors-1-class-2 へ行く。
sensors-1-class-2 の差分を削除
[[FrontPage]]
 command: set readInterval=60000
 command: set execInterval=0
 command: set reportLength=240
 command: program Sensors
 program: '
 program: ' init i2c
 program: ex("pi4j", "i2c use 1")
 program: '
 program: ' init lux sensor 
 program: ex("pi4j", "i2c write1 0x29,0x80,0x03") 'power up the tsl2561 lux sensor
 program: ex("pi4j", "i2c write1 0x29,0x81,0x00")
 program: ex("pi4j", "i2c write1 0x29,0x86,0x00") 'scale
 program: ex("pi4j", "i2c write1 0x29,0x80,0x00") 'power down
 program: ex("pi4j", "i2c write1 0x29,0x80,0x03") ' power up again
 program: delay(50)
 program: '
 program: 'get the lux value
 program: v1=ex("pi4j", "i2c read1 0x29,0x8c")
 program: v2=ex("pi4j", "i2c read1 0x29,0x8d")
 program: lux=s2i(v2)*256+s2i(v1)
 program: '
 program: 'get the Aanalog value from the ADS1115 ch1
 program: config=0x0003|0x0000|0x0000|0x0000|0x0080|0x0100
 program: config=config|0x0000
 #program: config=config|0x4000 'channel 0
 program: config= config|0x5000 'channel 1
 program: config=config|0x8000
 program: ex("pi4j", "i2c write2 0x49,0x01,"+config)
 program: delay(10)
 program: v2=ex("pi4j","i2c read2 0x49,0x00")
 program: airpol=s2i(v2)
 #program: airpol=(airpol+32768)/16
 program: airpol=airpol+800
 program: '
 program: ' get temperature
 program: v1=ex("pi4j", "i2c read1 0x48,0x00")
 program: tmp=s2i(v1)
 program: '
 program: ' get motion
 program: v1=ex("pi4j","get-a-0")
 program: motion=s2i(v1)
 program: '
 program: ex("pi4j", "i2c close")
 program: '
 program: date=ex("service","getCurrentDate.")
 program: ex("service","putSendBuffer device=light, Date="+date+", v="+lux)
 program: ex("service","putSendBuffer device=airPol, Date="+date+", v="+airpol)
 program: ex("service","putSendBuffer device=temp, Date="+date+", v="+tmp)
 program: ex("service","putSendBuffer device=motion, Date="+date+", v="+motion)
 program: ex("service","sendResults.")
 command: end Sensors
 command: run Sensors
 command: set pageName="sensors-1-h-<hour>"