i2c-hdc1080-1 の変更点

追加された行はこの色です。
削除された行はこの色です。
i2c-hdc1080-1 へ行く。
i2c-hdc1080-1 の差分を削除
[[FrontPage]]
 objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-hdc1080-1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-hdc1080-1
 device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
 command: set readInterval=30000
 command: set execInterval=0
 command: set reportLength=120
 command: program i2cHdc1080
 program: '
 program: ' init i2c
 program: ex("pi4j", "i2c use 1")
 program: '
 program: ' init hdc1080 
 program: ex("pi4j", "i2c write2 0x40,0x02,0x10,0x00") ' config
 program: '
 program: 'get temp
 program: ex("pi4j", "i2c write-b 0x40,0x00") ' temp
 program: delay(15)
 program: v1s=ex("pi4j", "i2c read-A-2 0x40") ' get temp
 program: temp=s2i(v1s)/65536.0*165-40
 program: '
 program: 'get humidity
 program: ex("pi4j", "i2c write-b 0x40,0x01") ' get humidity
 program: delay(15)
 program: v2s=ex("pi4j", "i2c read-A-2 0x40") 'humid
 program: humid=s2i(v2s)/65536.0*100
 program: '
 program: ex("pi4j", "i2c close.")
 program: 'ex("service","clear sendBuffer")
 program: ex("service","putSendBuffer device=temp, Date="+ex("service","getCurrentDate.")+", v="+temp)
 program: ex("service","putSendBuffer device=humid, Date="+ex("service","getCurrentDate.")+",v="+humid)
 program: ex("service","sendResults.")
 command: end i2cHdc1080
 command: run i2cHdc1080
 result:
 device=temp, Date=2019/6/6/ 23:17:9, v=28.83392333984375
 device=humid, Date=2019/6/6/ 23:17:9,v=-41.44287109375
 currentDevice="yamaRasPiDp1_1",Date=2019/6/6/ 23:17:9

 device=temp, Date=2019/6/6/ 23:17:38, v=28.6224365234375
 device=humid, Date=2019/6/6/ 23:17:38,v=-41.80908203125
 currentDevice="yamaRasPiDp1_1",Date=2019/6/6/ 23:17:38