i2c-hdc1080-1 のバックアップ(No.7)

バックアップ一覧
差分を表示
現在との差分を表示
ソースを表示
i2c-hdc1080-1 へ行く。
- 1 (2018-09-20 (木) 00:24:19)
- 2 (2018-09-20 (木) 01:20:52)
- 3 (2018-09-20 (木) 19:35:39)
- 4 (2019-02-19 (火) 01:10:00)
- 5 (2019-02-20 (水) 20:18:16)
- 6 (2019-02-22 (金) 00:36:53)
- 7 (2019-02-24 (日) 21:01:57)
- 8 (2019-03-21 (木) 19:09:15)
- 9 (2019-04-03 (水) 02:21:52)

objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-hdc1080-1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-hdc1080-1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=120
command: program i2cHdc1080
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: ' init hdc1080 
program: ex("pi4j", "i2c write2 0x40,0x02,0x10,0x00") ' config
program: '
program: 'get temp
program: ex("pi4j", "i2c write-b 0x40,0x00") ' temp
program: delay(15)
program: v1s=ex("pi4j", "i2c read-A-2 0x40") ' get temp
program: temp=s2i(v1s)/65536.0*165-40
program: '
program: 'get humidity
program: ex("pi4j", "i2c write-b 0x40,0x01") ' get humidity
program: delay(15)
program: v2s=ex("pi4j", "i2c read-A-2 0x40") 'humid
program: humid=s2i(v2s)/65536.0*100
program: '
program: ex("pi4j", "i2c close.")
program: 'ex("service","clear sendBuffer")
program: ex("service","putSendBuffer device=temp, Date="+ex("service","getCurrentDate.")+", v="+temp)
program: ex("service","putSendBuffer device=humid, Date="+ex("service","getCurrentDate.")+",v="+humid)
program: ex("service","sendResults.")
command: end i2cHdc1080
command: run i2cHdc1080
result:
device=temp, Date=2019/2/24/ 21:10:52, v=21.95556640625
device=humid, Date=2019/2/24/ 21:10:52,v=42.633056640625
currentDevice="yamaRasPiDp1_1",Date=2019/2/24/ 21:10:52