i2c-opt3001-ex1 のバックアップ(No.6)

バックアップ一覧
差分を表示
現在との差分を表示
ソースを表示
i2c-opt3001-ex1 へ行く。
- 1 (2019-02-24 (日) 17:11:25)
- 2 (2019-02-24 (日) 18:27:22)
- 3 (2019-02-24 (日) 21:04:54)
- 4 (2019-03-21 (木) 11:08:53)
- 5 (2019-03-21 (木) 19:38:50)
- 6 (2019-03-31 (日) 16:16:30)

objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-opt3001-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-opt3001-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=120
command: program sensors
program: 'ex("service","clear sendBuffer")
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: ' init lux sensor ...OPT3001
program: ex("pi4j", "i2c write2 0x44, 0x01, 0xc6, 0x10")
program: delay(15)
program: '
program: 'get the lux value
program: 'ex("pi4j", "i2c write-b 0x44,0x00")
program: delay(15)
program: vs=ex("pi4j", "i2c read2 0x44,0x00") ' get lux
program: 'vs=ex("pi4j", "i2c read-A-2 0x44")
program: vi=s2i(vs)
program: vMantissa=(vi & 0x0fff)*1.0
program: vExponent=(vi & 0xf000)/(2^12)
program: v=vMantissa*(0.01 * 2^vExponent)
program: ex("service","putSendBuffer device=lux, Date="+ex("service","getCurrentDate.")+", v="+v)
program: '
program: '
program: ex("pi4j", "i2c close.")
program: ex("service","sendResults.")
command: end sensors
command: run sensors
result:
device=lux, Date=2019/3/21/ 19:47:7, v=0.0
device=lux, Date=2019/3/21/ 19:47:36, v=0.0
currentDevice="yamaRasPiDp1_1",Date=2019/3/21/ 19:47:36