i2c-mpl3115a2-ex1 のバックアップ(No.6)

バックアップ一覧
差分を表示
現在との差分を表示
ソースを表示
i2c-mpl3115a2-ex1 へ行く。
- 1 (2019-02-23 (土) 22:30:41)
- 2 (2019-02-24 (日) 00:14:29)
- 3 (2019-02-24 (日) 12:45:45)
- 4 (2019-02-24 (日) 17:02:52)
- 5 (2019-02-24 (日) 21:03:40)
- 6 (2019-03-21 (木) 12:01:56)

objectPage http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1 or http://www.yama-lab.org/fwb4pi/index.php?i2c-mpl3115a2-ex1
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=30000
command: set execInterval=0
command: set reportLength=120
command: program sensors
program: 'ex("service","clear sendBuffer")
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: '
program: ' init barometer , MPL3115A2
program: 'ex("pi4j", "i2c write1 0x60,0x26,0x39") 'set to altmeter with an OSR=128
program: 'ex("pi4j", "i2c write1 0x60,0x13,0x07") 'enable data flags in PT_DATA_CFG
program: '
program: ' read pressure
program: p1s=ex("pi4j", "i2c read1 0x60,0x01")
program: p2s=ex("pi4j", "i2c read1 0x60,0x02")
program: p3s=ex("pi4j", "i2c read1 0x60,0x03")
program: p1=s2i(p1s)
program: p2=s2i(p2s)
program: p3=s2i(p3s)
program: px=(p1*256+p2)*256+p3
program: px=px/16
program: px=px/4.0
program: px=px/100.0
program:  ex("service","putSendBuffer device=pressure, Date="+ex("service","getCurrentDate.")+", v="+px)
program: '
program: ex("pi4j", "i2c close.")
program: ex("service","sendResults.")
command: end sensors
command: run sensors
result:
device=pressure, Date=2019/2/24/ 21:12:7, v=143.9221875
device=pressure, Date=2019/2/24/ 21:12:35, v=2446.6771875
currentDevice="yamaRasPiDp1_1",Date=2019/2/24/ 21:12:35