LightSensor1 のバックアップ(No.14)

FrontPage
objectPage http://www.yama-lab.org/dp-1/index.php?HexTestEx1 or http://www.yama-lab2.org/dp-1/index.php?HexTestEx2
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=15000
command: set execInterval=0
command: program i2cLightSensor
program: '
program: ' init i2c
program: ex("pi4j", "i2c use 1")
program: '
program: ' init lux sensor 
program: ex("pi4j", "i2c write1 0x29,0x80,0x03") 'power up the tsl2561 lux sensor
program: ex("pi4j", "i2c write1 0x29,0x81,0x00")
program: ex("pi4j", "i2c write1 0x29,0x86,0x00") 'scale
program: ex("pi4j", "i2c write1 0x29,0x80,0x00") 'power down
program: ex("pi4j", "i2c write1 0x29,0x80,0x03") ' power up again
program: delay(50)
program: '
program: 'get the lux value
program: v1=ex("pi4j", "i2c read1 0x29,0x8c")
program: v2=ex("pi4j", "i2c read1 0x29,0x8d")
program: v=s2i(v2)*256+s2i(v1)
program: '
program: ex("pi4j", "i2c close.")
program: ex("service","clear sendBuffer")
program: ex("service","putSendBuffer device=light, Date="+ex("service","getCurrentDate.")+", v="+v);
program: ex("service","sendResults.")
command: end i2cLightSensor
command: run i2cLightSensor
result:
device=light, Date=2016/11/27/ 0:23:24, v=3
currentDevice="yamaRasPiDp1_1",Date=2016/11/27/ 0:23:24