FrontPage

objectPage http://www.yama-lab.org/fwb4pi/index.php?SerialEx1 or http://www.yama-lab2.org/fwb4pi/index.php?SerialEx2
device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min.
command: set readInterval=60000
command: set execInterval=0
command: program serial1
program: '
program: ' get all DI1 ID
program: ex("pi4j", "serial send \"get * port DI1.\".")
command: end serial1
#command: clear sendBuffer
command: run serial1
result:
device=sensorNetwork, Date=2017/6/10/ 23:30:49,  a32=0x81007dd3, from=0x8100bc31, port=DI1, serial=1, v=0, event=get.
device=sensorNetwork, Date=2017/6/10/ 23:31:47,  a32=0x81007dd3, from=0x81007853, port=DI1, serial=2, v=0, event=get.
device=sensorNetwork, Date=2017/6/10/ 23:32:47,  a32=0x81007dd3, from=0x81007853, port=DI1, serial=3, v=0, event=get.
device=sensorNetwork, Date=2017/6/10/ 23:33:47,  a32=0x81007dd3, from=0x81007853, port=DI1, serial=4, v=0, event=get.
device=sensorNetwork, Date=2017/6/10/ 23:34:47,  a32=0x81007dd3, from=0x81007853, port=DI1, serial=5, v=0, event=get.
currentDevice="yamaRasPiDp1_1",Date=2017/6/10/ 23:34:47

トップ   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS