LED_and_Button_ex01 のバックアップ(No.1)

バックアップ一覧
差分を表示
現在との差分を表示
ソースを表示
LED_and_Button_ex01 へ行く。
- 1 (2022-06-23 (木) 14:54:21)
- 2 (2022-06-23 (木) 15:00:49)
- 3 (2022-07-02 (土) 23:25:20)
- 4 (2022-07-03 (日) 11:17:16)
- 5 (2022-07-03 (日) 23:27:51)

LightSensor1 objectPage http://www.yama-lab.org/fwb4pi/index.php?LightSensor1 or http://www.yama-lab.org/fwb4pi/index.php?LightSensor1 device yamaRasPiDp9_1 or yamaRasPiDp9_2 start after no write for 10 min. command: set readInterval=15000 command: set execInterval=0 command: program i2cLightSensor? program: ' program: ' init i2c program: ex("pi4j", "i2c use 1") program: ' program: ' init lux sensor program: ex("pi4j", "i2c write1 0x29,0x80,0x03") 'power up the tsl2561 lux sensor program: ex("pi4j", "i2c write1 0x29,0x81,0x00") program: ex("pi4j", "i2c write1 0x29,0x86,0x00") 'scale program: ex("pi4j", "i2c write1 0x29,0x80,0x00") 'power down program: ex("pi4j", "i2c write1 0x29,0x80,0x03") ' power up again program: delay(50) program: ' program: 'get the lux value program: v1=ex("pi4j", "i2c read1 0x29,0x8c") program: v2=ex("pi4j", "i2c read1 0x29,0x8d") program: v=s2i(v2)*256+s2i(v1) program: ' program: ex("pi4j", "i2c close.") program: ex("service","clear sendBuffer") program: ex("service","putSendBuffer? device=light, Date="+ex("service","getCurrentDate?.")+", v="+v); program: ex("service","sendResults.") command: end i2cLightSensor? command: run i2cLightSensor? result: device=light, Date=2021/11/8/ 16:53:30, v=0 currentDevice="yamaRasPiDp1_1",Date=2021/11/8/ 16:53:30